# 9000 Series Precision Cell Testers

> NEWARE 9000 Series precision cell testers: 0–5 V, 0.1 µA current resolution, 1 kHz sampling and ≤100 µs response for coin cells, SEI and solid-state work.

Canonical: https://batteryxlab.com/9000-series/
Language: en

- [Home](https://batteryxlab.com/)
- Products
- Cell Testers

9000 Series · Precision cell testers

# 9000 Series — precision micro-current cell testers

The 9000 Series is the 0–5 V precision tier of the cell-tester range: 0.1 µA-class current resolution, 1 kHz sampling and ≤100 µs response, for materials research, coin cells, SEI formation and solid-state electrolytes.

Five models span 2–8 channels and 5–15 A. They share the same measurement front end — low-noise amplification, four current ranges per channel and a response fast enough to catch early-cycle transients.

[Request a quote](https://batteryxlab.com/contact/)
[Browse the model library](https://batteryxlab.com/products/)

Models

## Five models, one measurement front end

Voltage is 0–5 V on every model. Channel count, current range and per-channel power are the variables.

[See all 36 models →](https://batteryxlab.com/products/)

| Model | Channels | Voltage | Current ranges | Power per channel | Sampling | Response | Note |
| --- | --- | --- | --- | --- | --- | --- | --- |
| CT-9008-5V12A-SMB | 8 | 0 – 5 V | 0.12 mA – 12 A (4 ranges) | 60 W | 1 kHz | ≤100 µs | — |
| CT-9008-5V6.5A-SMB | 8 | 0 – 5 V | 0.1 µA – 6.5 A (4 ranges) | 32.5 W | 1 kHz | ≤100 µs | — |
| CT-9002-5V6A-204n | 2 | 0 – 5 V | 0.1 µA – 6 A (4 ranges) | 30 W | 1 kHz | ≤100 µs | — |
| CT-9004-5V5A | 4 | 0 – 5 V | 0.1 µA – 5 A (4 ranges) | 25 W | 1 kHz | ≤100 µs | — |
| CT-9008-5V15A | 8 | 0 – 5 V | 0.015 A / 0.15 A / 1.5 A / 15 A (4 ranges) | 75 W | 1 kHz | ≤350 µs | Three-phase 380 V supply |

Specifications are reproduced from the model table as published. Final configuration and part numbers are confirmed at quotation.

Why a separate platform

## Below 1 mA, the bench is part of the measurement

At 0.1 µA, the current a general-purpose cycler treats as noise is the signal. The 9000 Series front end is designed around that floor: lower-noise amplification and four auto-switched current ranges, with sampling fast enough to separate the measurement from the electrical environment it sits in.

Range switching matters more here than it does at 30 A. A µA-range test that autoranges mid-step changes the effective gain and can put a step in the data. The 9000 Series keeps range switching tied to the test step and logged, so a cycle trace stays comparable across ranges. Cables and fixtures are the last metre of the same problem — shielded leads and short, fixed four-terminal paths keep the floor where the specification says it is, which is why the series is specified for coin cells, SEI formation and solid-state electrolytes.

Where it fits

## 9000 vs 4000 and 8000

The 4000 Series is the general cell cycler — broad voltage and current envelopes at 10 Hz sampling, for everyday cycling and production. The 8000 Series covers in-situ channels and higher-current cell testing. The 9000 Series is the precision tier of the same catalogue: choose it when the experiment is noise-limited rather than power-limited.

## Specifying a µA-class test?

Send the current range, channel count and fixture type. We will confirm the 9000 Series configuration and cable set against your cells.

[Request a quote](https://batteryxlab.com/contact/)
[Browse the model library](https://batteryxlab.com/products/)

## Related pages

- [Solid-state battery testing](https://batteryxlab.com/applications/#solid-state)
- [Sodium-ion battery testing](https://batteryxlab.com/applications/#sodium-ion)
- [Fast-charge testing](https://batteryxlab.com/applications/#fast-charge)

- [See all 36 models →](https://batteryxlab.com/products/)

- [All 52 peer-reviewed papers](https://batteryxlab.com/publications/)

## Research citing this instrument family

- [Metal-Dependent Lithiation Behaviors in Cobalt and Zinc Metal–Organic Frameworks as Lithium-Ion Battery Anodes](https://doi.org/10.1021/acs.inorgchem.5c06095) — Tungad (2026), Inorganic Chemistry
- [Expediting Lithium Electrochemistry via a Bilayer for High-Rate Lithium Metal Batteries](https://doi.org/10.1007/s40820-026-02146-3) — Park (2026), Nano-Micro Letters
- [Electrolyte chemistry of adaptive hydrogen bonded domains for high voltage lithium metal batteries](https://doi.org/10.1038/s41467-026-69160-2) — Yang (2026), Nature Communications

## Contact

- Email: sales@batteryxlab.com
- Phone: +852 4436 9298
- WhatsApp: https://wa.me/85244369298
- Request a quote: https://batteryxlab.com/contact/
- Full site index for agents: https://batteryxlab.com/llms.txt
