<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0">
  <channel>
    <title>batteryxlab technical notes</title>
    <link>https://batteryxlab.com/notes/</link>
    <description>Application notes on battery test measurement, timing, formation, thermal control, BMS data and safety.</description>
    <language>en</language>
    <lastBuildDate>Fri, 04 Dec 2026 00:00:00 GMT</lastBuildDate>
    <item>
      <title>Safety interlocks: layers and proof tests</title>
      <link>https://batteryxlab.com/notes/safety-interlocks/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/safety-interlocks/</guid>
      <pubDate>Fri, 04 Dec 2026 00:00:00 GMT</pubDate>
      <description>Overvoltage, overcurrent, overtemperature, door and E-stop belong to different layers. How to design the chain and the checks test plans usually miss.</description>
    </item>
    <item>
      <title>Round-trip efficiency: cell, tester, facility</title>
      <link>https://batteryxlab.com/notes/round-trip-energy-efficiency/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/round-trip-energy-efficiency/</guid>
      <pubDate>Wed, 02 Dec 2026 00:00:00 GMT</pubDate>
      <description>Round-trip efficiency is three efficiencies stacked. How to measure the cell term, where the rest goes, and why one point matters over a cycle life.</description>
    </item>
    <item>
      <title>Cycle data: sampling, storage, audit trail</title>
      <link>https://batteryxlab.com/notes/cycle-data-management/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/cycle-data-management/</guid>
      <pubDate>Mon, 30 Nov 2026 00:00:00 GMT</pubDate>
      <description>A 100 Hz record is not free. How to choose a rate per test, keep the raw data intact, and hand a defensible record to the LIMS.</description>
    </item>
    <item>
      <title>BMS communication: CAN and CAN-FD records</title>
      <link>https://batteryxlab.com/notes/bms-communication-in-testing/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/bms-communication-in-testing/</guid>
      <pubDate>Sat, 28 Nov 2026 00:00:00 GMT</pubDate>
      <description>Channel data shows what the tester did. BMS frames show what the pack thought. DBC mapping, DTCs, HVIL and a shared time base.</description>
    </item>
    <item>
      <title>Chamber uniformity: what ±0.5 °C means</title>
      <link>https://batteryxlab.com/notes/chamber-temperature-uniformity/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/chamber-temperature-uniformity/</guid>
      <pubDate>Thu, 26 Nov 2026 00:00:00 GMT</pubDate>
      <description>The two numbers on a chamber datasheet measure different things. How to read them, place sensors, and test the chamber under a real cell load.</description>
    </item>
    <item>
      <title>Negative-pressure formation and the cell</title>
      <link>https://batteryxlab.com/notes/formation-negative-pressure/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/formation-negative-pressure/</guid>
      <pubDate>Tue, 24 Nov 2026 00:00:00 GMT</pubDate>
      <description>Why formation fixtures pull a vacuum, how stack pressure and gas removal affect SEI and lithium plating, and how to prove equal pressure on every channel.</description>
    </item>
    <item>
      <title>Fixture contact resistance and cycle data</title>
      <link>https://batteryxlab.com/notes/cell-fixture-contact-resistance/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/cell-fixture-contact-resistance/</guid>
      <pubDate>Sat, 21 Nov 2026 00:00:00 GMT</pubDate>
      <description>Four-wire sensing does not remove the contact. Where to place the sense tips, what 1 mΩ costs at 100 A, and how to verify a fixture.</description>
    </item>
    <item>
      <title>Calibration intervals and ISO 17025</title>
      <link>https://batteryxlab.com/notes/calibration-traceability/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/calibration-traceability/</guid>
      <pubDate>Wed, 18 Nov 2026 00:00:00 GMT</pubDate>
      <description>How to read a calibration certificate, compare uncertainty with tolerance, and set an interval that survives an audit.</description>
    </item>
    <item>
      <title>Energy recovery economics for cycling</title>
      <link>https://batteryxlab.com/notes/energy-recovery-economics/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/energy-recovery-economics/</guid>
      <pubDate>Sun, 15 Nov 2026 00:00:00 GMT</pubDate>
      <description>What &gt;90% regenerative feedback does and does not cover, and how to build a payback calculation from your own throughput and tariff.</description>
    </item>
    <item>
      <title>Sampling rate and HPPC: what 10 Hz hides</title>
      <link>https://batteryxlab.com/notes/sampling-rate-and-hppc/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/sampling-rate-and-hppc/</guid>
      <pubDate>Wed, 11 Nov 2026 00:00:00 GMT</pubDate>
      <description>The difference between 10 Hz, 100 Hz and 1000 Hz is not file size. It is which part of a pulse, and which dQ/dV feature, survives the record.</description>
    </item>
    <item>
      <title>DCIR pulse timing: where the numbers come from</title>
      <link>https://batteryxlab.com/notes/dcir-pulse-timing/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/dcir-pulse-timing/</guid>
      <pubDate>Sun, 08 Nov 2026 00:00:00 GMT</pubDate>
      <description>Current response, sampling interval and range selection decide whether a DCIR value is reproducible. A timing budget for 10 ms and 10 s measurements.</description>
    </item>
    <item>
      <title>Reading microamp leakage on a 300 A channel</title>
      <link>https://batteryxlab.com/notes/reading-microamp-leakage/</link>
      <guid isPermaLink="true">https://batteryxlab.com/notes/reading-microamp-leakage/</guid>
      <pubDate>Thu, 05 Nov 2026 00:00:00 GMT</pubDate>
      <description>A 300 A range cannot resolve microamps. How to route a leakage step to a channel that can, and what to record when it gets there.</description>
    </item>
  </channel>
</rss>
